Light Duty Energy Saver models are perfect for smaller commercial
applications that require more power than a residential water heater but not as much as a larger commercial unit. Each of
these models combines energy saving performance with the durability to withstand the day-to-day demands of commercial water
heating. The 50 gallon Light Duty Energy Saver Model incorporates the Bradford White Defender Safety System®, a maintenance-free
combustion technology that resists the ignition of flammable vapors outside the water heater.
(Sample model numbers
include: 50T-65FB-3N, 65T-65B-3N & 100T-88B-3N)
Factory installed Hydrojet® Total Performance System (100T-88
features the Hydrojet® Sediment Reduction System)
Vitraglas® lined tank
Side connections for space heating
Protective magnesium anode rod
NSP Construction available
2"
Non CFC foam insulation (65T-65 has 1")
DEFENDER SAFETY SYSTEM® LIGHT DUTY TTW® MODELS
These units are all perfect for applications where installation
flexibility is as important as meeting hot water demands. Power vented for positive exhaust, these units can be vented up
to 75 equivalent feet horizontally and vertically.
(Sample model numbers include: TW4-50S-67FB-3N & TW4-70S-67FB-3N)
Factory installed Hydrojet® Total Performance System
May be installed up to 60' from an outside wall with 4" PVC vent pipe and 3 elbows
May be installed up to 30' from an
outside wall with 3" PVC vent pipe and 3 elbows
Side
connections for space heating
Smart
Valve control
Vitraglas®
lined tank
Protective Magnesium
anode rod
T&P relief valve
installed
Brass drain valve
2" Non CFC foam insulation
ENERGY SAVER ELECTRONIC IGNITION
MODELS
ASME and Non-ASME Electronic Ignition models provide solutions
to applications with various demands for hot water. With capacities ranging from 38 - 100 gallons and with inputs from 155,000
- 505,000 BTUs, there’s a model that'll meet various requirements.
(Sample model numbers include: D75T-125-3N,
D100T-199-3N & D100L-270-3N)
Meets
ASHRAE 90.1b 1992 energy efficiency standards
Automatic flue damper reduces standby loss
Commercial Hydrojet® Sediment Reduction System
Vitraglas® lined tank
Magnesium anode rods provide extra corrosion protection
Brass drain valve
Non
CFC foam insulation
POWER
DIRECT VENT MODELS
Power Direct Vent ASME and Non-ASME models are ideal for installations
where options are limited due to negative air pressure or corrosive air supply. These units utilize a co-axial concentric
(pipe inside a pipe) venting system that draws air in for combustion through one pipe and exhausts products of combustion
out the other.
Light Duty Energy Saver models are perfect for smaller commercial
applications that require more power than a residential water heater but not as much as a larger commercial unit. Each of
these models combines energy saving performance with the durability to withstand the day-to-day demands of commercial water
heating. The 50 gallon Light Duty Energy Saver Model incorporates the Bradford White Defender Safety System®, a maintenance-free
combustion technology that resists the ignition of flammable vapors outside the water heater. 
These units are all perfect for applications where installation
flexibility is as important as meeting hot water demands. Power vented for positive exhaust, these units can be vented up
to 75 equivalent feet horizontally and vertically. 
ASME and Non-ASME Electronic Ignition models provide solutions
to applications with various demands for hot water. With capacities ranging from 38 - 100 gallons and with inputs from 155,000
- 505,000 BTUs, there’s a model that'll meet various requirements. 
Power Direct Vent ASME and Non-ASME models are ideal for installations
where options are limited due to negative air pressure or corrosive air supply. These units utilize a co-axial concentric
(pipe inside a pipe) venting system that draws air in for combustion through one pipe and exhausts products of combustion
out the other.