Reliable Heating & AC Services in Bloomfield Hills, MI

Completed routine preventative maintenance on residential standby generator unit. Inspected and replaced air filter components, verified proper operation of all mechanical systems, and confirmed unit readiness for automatic backup power operation.

Returned to property to complete plumbing installation by installing new trap assembly and discharge line using white PVC piping with proper fittings and connections. Work was performed in basement utility area, connecting to existing vertical drain stack with appropriate coupling, ensuring proper drainage flow and code-compliant trap configuration.

Completed installation of transfer switch for backup generator system, establishing proper electrical connections between utility power and generator supply. Installed and configured power distribution panel with multiple outlet configurations including L6-50R (50A/250V), L14-50R (50A/125-250V), and L6-30R (30A/250V) twist-lock receptacles to accommodate various load requirements. Verified proper circuit protection at main electrical panel, ensured all connections met code requirements, and confirmed transfer switch operation for seamless power transition during utility outages.

Performed scheduled preventive maintenance on Kohler standby generator system. Inspected control panel operations, verified LCD display functionality showing proper sensor status and standby mode, tested AUTO/OFF/RUN selector switch positions, and confirmed all navigation buttons responding correctly. Conducted visual inspection of unit exterior, cleaned control panel surface, and verified service access port accessibility for future maintenance requirements.

Performed scheduled maintenance on residential standby generator unit. Removed and inspected spark plugs, finding carbon buildup on one plug indicating normal combustion deposits from operation. Replaced spark plugs with new units to ensure reliable ignition and optimal engine performance. Completed oil change service, draining used oil into collection pan and refilling with fresh oil to manufacturer specifications. Verified all internal components, including air filter assembly, electrical connections, and control panel wiring for proper operation. Closed and secured cabinet panels upon completion of maintenance tasks.

Completed callback visit for 4-ton AC and coil installation to install complimentary filters and makeup air hood. Inspected previously installed right-position air conditioning system and evaporator coil to verify proper operation following initial installation. Delivered and installed makeup air hood component and provided complimentary air filters to complete project punch list items.

Conducted estimate for complete HVAC system replacement including 19-year-old air conditioning unit with failed compressor and 19-year-old furnace in basement utility room. Evaluated existing equipment configuration, ductwork routing through basement ceiling joists, thermostat location, and exterior AC placement at back corner of property. Provided comprehensive replacement options for combined AC and furnace installation to maximize cost efficiency per customer request.

Completed preventive maintenance on two commercial air conditioning systems. Verified thermostat operation, performed system diagnostics using digital manifold gauges with readings indicating proper superheat and subcool levels, and inspected outdoor condenser units including coils, refrigerant lines, and electrical connections. Customer enrolled in Worry Free Service Agreement on-site following maintenance completion.

Completed preventive maintenance on residential air conditioning system under Worry Free Service Agreement. Set and programmed thermostat to customer's preferred schedule and comfort settings. Inspected outdoor condenser unit, confirmed proper operation of compressor and refrigerant lines, and verified all electrical connections are secure with no visible damage to components or coil fins.

# Electrical Maintenance - Generator Performed routine preventive maintenance on residential Generac standby generator. Conducted comprehensive system inspection including visual examination of all major components, electrical connections, and housing integrity. Inspected battery condition and terminals, noting proper voltage levels and secure cable connections with appropriate terminal protection in place. Evaluated blower assembly and air circulation components, observing dust and debris accumulation on blower wheel blades and housing surfaces consistent with normal outdoor installation exposure. Documented existing surface rust and discoloration on metal housing components typical of equipment age and environmental exposure. Verified generator enclosure integrity and proper ventilation pathway clearance. Confirmed all mechanical components accessible and operational. Unit currently running without reported issues or operational concerns. Documented equipment condition through ph

Responded to service call for loud unusual noise coming from outdoor condenser unit on 2-year-old air conditioning system that was still providing cooling. Upon arrival, performed diagnostic evaluation of condenser fan assembly and motor operation. Inspected refrigerant levels using digital manifold gauges and verified system pressures were within manufacturer specifications, confirming cooling performance remained adequate despite audible concern.

Responded to service call for Kohler generator that failed to start during power outage. Upon arrival, discovered significant debris accumulation throughout the generator cabinet, including decomposed organic matter, soil, twigs, and plant material that had collected over an extended period. The debris had infiltrated critical compartments and surrounded key components including the blower housing and motor assembly. Thoroughly cleaned all affected areas, removing accumulated dirt, leaves, and organic debris from interior compartments, base channel, and surrounding concrete pad. Inspected electrical components and connections for damage or contamination caused by debris infiltration. Verified proper operation of all mechanical systems and conducted startup test to confirm generator functionality was restored.

Responded to service call for 6-year-old air conditioning system experiencing freezing, breaker tripping, and restricted airflow. Inspected outdoor unit and electrical disconnect panel, documenting 60-amp breaker and wiring configuration. Multiple rescheduling required to complete diagnostic evaluation of compressor cycling, electrical load issues, and potential airflow restrictions causing coil freeze-up.

Coordinated with mechanical inspector at 8:00 AM for required pressure testing of natural gas piping system. Performed decibel testing on generator installation to verify compliance with noise ordinance requirements. Contacted electrical inspector to schedule final inspection and verification of generator electrical connections. Documented gas meter installation, piping configuration with shut-off valve, and all connection points through photographic evidence for inspection records.

Completed installation of multi-zone HVAC system in residential property. Installed zone control dampers and ductwork in attic space, including mounting control panels and running necessary metal ductwork through existing structural framing. All components were properly secured with metal strapping, electrical connections were made to zone control equipment, and system was tested for proper operation across all zones.

Completed installation of 2-ton air conditioning unit with matching evaporator coil on existing Bryant furnace system. All mechanical and electrical permits were obtained prior to installation, with proper right-side placement and reconnection of existing systems. Unit was installed per manufacturer specifications, refrigerant lines connected, electrical wiring completed, condensate drainage verified, and system tested for proper operation. Provided furnace filters as requested.

Completed comprehensive preventive maintenance on Bryant brand outdoor air conditioning condenser unit located at rear of property. Performed standard AC tune-up protocol including visual inspection of cabinet and coil fins, which were found to be clean and in excellent condition with no debris accumulation, damage, or corrosion noted. All exterior components including louvered ventilation panels and metal casing showed normal weathering with structural integrity intact and proper airflow capability maintained throughout unit.

Completed callback to address municipal inspection violations and system malfunction following 4-ton AC and coil installation. Corrected buried refrigerant line set by raising, insulating with UV-protective jacketing, and installing proper support brackets per code requirements. Relocated fresh air intake duct to maintain minimum 36-inch vertical separation from furnace exhaust termination point. Applied electrical panel labels identifying circuit breaker assignment and equipment designation for code compliance.

Completed electrical estimate for installation of a 2-4 person residential generator system at property currently without backup power. Assessed existing electrical panel configuration, documented circuit breaker layout and available capacity, and evaluated basement utility area for optimal generator placement and electrical integration. Photographed current electrical infrastructure including main distribution panel with labeled circuits and unfinished ceiling space showing existing copper plumbing, PVC piping, and electrical wiring runs to determine routing requirements for new generator transfer switch and connection conduits.

Completed full HVAC system installation including a 70,000 BTU furnace and 3-ton air conditioning unit positioned in right side yard location. Installation included S40 thermostat, condensate pump, and system flush. All mechanical and electrical permits obtained and work performed to code. Unit mounted on concrete pad with proper refrigerant line connections and electrical reconnection to existing service. System charged, tested, and commissioned using manifold gauges to verify proper refrigerant levels and operational parameters. All equipment functioning within manufacturer specifications upon completion. AHRI certificate number 215660766 documentation provided for utility rebate qualification.